• The KME-V Pump is a vertical axis, radially split, ring section design multistage centrifugal pump of non-self priming type.
  • Impellers are between bearings, single entry, closed type and dynamically balanced. Impeller diameter will be corrected for optimal adherence to the required duty point.
  • For balancing the axial thrust, all impellers have back wear rings. For high pressure, balance disc application is used.
  • The pump series consists of 2 sizes. KME 100 and 125. Stages are from 2 up to max. 7 stages.
  • Pump and motor are connected to each other via flexible coupling.
  • Normally, discharge part is at motor side and suction part is at dead end side.

Suction and discharge nozzles may be a choice of three 90° positions. By special request, it is possible to put the suction nozzle at the motor side. In this arrangement pump and motor rotation must be counter clockwise

Suction Flange DN 125...DN 150 (PN 16)
Discharge Flange DN 100...DN 125  (PN 40)
Operating Pressure 40 Bar (Max)
Speed 1450 -1750 rpm
Stage Number  2 - 7
Flow Range 30 - 300 m³ / h
Head Range 30 - 190 m

Fields of Application

For pumping of clear and slightly contaminated liquids in:

  • Water supply systems,
  • Booster sets in high rise buildings and industry,
  • Water treatment,
  • Industrial washdown systems,
  • Fire extinguishing plants,
  • Boiler feed and condensate transfer,
  • Sanitary and cleaning installations,
  • For industrial applications and public services,
  • Water distribution services,
  • Industrial applications,
  • Shipbuilding, Mining, Power Stations, Filter Units,
  • Irrigation plants,

Central heating systems