- Masdaf
- Products
- After Sales
- Technology
- Contact Us
Single Stage, End Suction, Centrifugal Volute Pumps
• Main dimensions, compatible w ith EN 733 (DIN 24255) norm.
A total of 48 designed pumps available in the series.
• Single suction with closed impeller, and thrust balanced by
means of counter-balancing holes and back wear rings, thus
acquiring a dynamic balance.
• The pump and the motor have a standard connection to the
common base plate with a flexible coupling. Maintenance and
repair procedures are easily carried out since the pump fixtures
can be removed with the volute body remaining intact.
• Use of extended coupling also enables the removal of the
pump fixtures without moving the motor or the volute body.
• The series has been designed so that parts are easily replaced
and standardized. The entire series is made up of only 6 bearings and 10 shaft types, thus simplifying spare parts procurement
Suction Flange | DN 50... DN 400 |
Discharge Flange | DN 32...DN 350 |
Operating Pressure | 10 Bar |
Casing Test Pressure | 13 Bar |
Working Temperature | -25 – 130°C |
Impeller Dia. | 160...500 mm ø |
Speed Range | 1000 – 3600 rpm |
Flow Range | 5 – 3500 m³ / h |
Head Range | 4 - 105 m |
End Suction Centrifugal Pumps
FIELDS OF APPLICATIONS
• Water supply and booster stations.
• Irrigation, sprinkling, drainage processes.
• Tank systems.
• Hot-cold water circulation in cooling systems.
• Pumping of condensed water.
• Circulating water in pools.
• Industrial and domestic fluid pumping processes.
• Marine applications